Craftsman and Dewalt (Craftsman vs Dewalt) are two of the most renowned brands that manufacture high-quality air compressors. In this guide, I have selected Craftsman CMEC6150K to compare with Dewalt DWFP55126 to get the best one for you.
However, both Craftsman CMEC6150K and Dewalt DWFP55126 have some impressive features in common. Such as – both are pancake-style air compressors with 6-gallon tanks and have a 2.6 SCFM air flow capacity. So, which one to choose? No worries, this guide will help you to get the best deal.
Therefore, without any further delay, let’s start the discussion with the differences between Craftsman CMEC6150K and Dewalt DWFP55126-
What Are The Differences Between Craftsman And Dewalt
|Craftsman CMEC6150K has a motor of 0.8 hp.||Dewalt DWFP55126’s motor is 0.9 hp.|
|It generates an air pressure of 150 Max PSI.||This air compressor generates an air pressure of 165 Max PSI.|
|The noise level of Craftsman CMEC6150K is 86 dB.||Dewalt DWFP55126’s noise level is 75.5 dB.|
|Craftsman CMEC6150K weighs 32.5 lbs.||The weight of this air compressor is 30 lbs.|
|It has a purge valve at the bottom.||Dewalt DWFP55126 has a ball drain valve.|
|Craftsman CMEC6150K’s color is red.||The color of this air compressor is yellow and black.|
|An accessory kit of 13 pieces comes with Craftsman CMEC6150K.||It does not include any accessory kits.|
|It has a dimension of 16.5 x 16.5 x 17.88 inches.||The dimension of Dewalt DWFP55126 is 16 x 16 x 17.5 inches.|
|Best for: Light work easy maintenance|
Check Craftsman Price at Amazon
|Best for: High motor power lower noise level|
Check Dewalt Price at Amazon
So, you can see that the Craftsman CMEC6150K and Dewalt DWFP55126 have many differences. However, if you are looking for the best one, I highly suggest the Dewalt DWFP55126.
Are you wondering about my recommendation? Check the below section to get your answer:
Why Do I Suggest Dewalt?
- Dewalt DWFP55126 has a motor power of 0.9 hp, whereas the motor power of Craftsman CMEC6150K is 0.8 hp. That is, the motor of Dewalt is more powerful and can compress air with higher efficiency compared to Craftsman.
- The maximum air pressure generated inside Dewalt DWFP55126 is 165 PSI. In contrast, Craftsman CMEC6150K produces an air pressure of 150 Max PSI. Therefore, Dewalt can reach its normal cut-out pressure faster than Craftsman as it has a higher PSI rate.
- Dewalt DWFP55126 has a noise level of 75.5 dB. In comparison, the noise level of Craftsman CMEC6150K is 86 dB. Therefore, Dewalt provides a quieter working environment than Craftsman.
- The ball drain valve on the Dewalt DWFP55126 allows quick and thorough tank drying. On the other hand, Craftsman CMEC6150K has a purge valve for removing moisturizer from the tank. However, the ball drain valves of Dewalt are more effective in tight-sealing the tank than the purge valves of Craftsman.
- Dewalt DWFP55126 weighs just 30 lbs, whereas the Craftsman CMEC6150K is 32.5 lbs. So, Dewalt is a bit lighter and easier to move than Craftsman.
Therefore, after all these discussions, I hope the reasons for my recommendation to Dewalt DWFP55126 are clear to you. So, if you agree with me, you may purchase a Dewalt air compressor.
Bostitch 6-Gallon Air Compressor Review In 2023: Pick Best Performer
Craftsman Air Compressor Review in 2023: Full Buyer’s Guide
Discover the Power of DeWalt DWFP55126 – A Comprehensive Review
Other Features Of Craftsman Vs Dewalt
|Editor’s Rating||4.5 out of 5||4.7 out of 5|
|Power Source||Corded Electric||Corded Electric|
|Air Flow Capacity||2.6 SCFM @ 90 PSI||2.6 SCFM @ PSI|
|Capacity||6 Gallon||6 Gallon|
|Voltage||120 Volts||120 Volts|
|Air Flow Regulator||Yes||Yes|
|Recommended Uses||DrillingAir BrushingSprayingNailing||DrillingAir BrushingSprayingNailing|
|Warranty||1-Year (Limited Warranty)||1-Year (Limited Warranty)|
Similar Features Of Craftsman Vs Dewalt
Besides the differences, Craftsman CMEC6150K and Dewalt DWFP55126 share many similar features. And it is essential to know those features before purchasing.
So, let’s check the common characteristics of these two air compressors-
You may like to read about
Dewalt DCC020IB Review: A Must-Have Inflator
Air Flow Capacity (SCFM)
One of the most crucial features to consider in any air compressor is its airflow capacity. However, the unit of measurement for airflow capacity is Cubic feet Per Meter (CFM) or Standard Cubic feet Per Meter (SCFM).
Craftsman CMEC6150K and Dewalt DWFP55126 have an airflow capacity of 2.6 SCFM at 90 PSI. This rate makes the air compressor ideal for light works like- drilling, nailing, airbrushing, etc.
The capacity of the tank of an air compressor determines how long the air tool can run. For example, craftsman CMEC6150K and Dewalt DWFP55126 have a tank of 6 gallons.
With this tank capacity, both air compressors can run air tools for quite a long time. Moreover, these 6-gallon pancake-style air compressors are ideal for nail guns, spray painting, and many more.
Craftsman CMEC6150K and Dewalt DWFP55126 are corded electric air compressors with an oil-free pump. These oil-free features of the air compressors prevent overheating and minimize the requirement of extra start-up times.
Moreover, it reduces the risk of uncertain accidents that oil-lubricated pumps cause. With these two air compressors, you need not worry about oil level monetization and frequent oil replacement. Thus, it will also save your maintenance cost.
Air Relief Valve
Both Craftsman CMEC6150K and Dewalt DWFP55126 have air relief valves to limit air pressure inside the tank. These air relief valves are a crucial part of the air compressors as they control the air pressure inside the tank.
Moreover, when the air compressor creates too much pressure inside the tank, these valves release extra air. Thus, they prevent over-pressurization and minimize the risk of any uncertain accidents.
The SCFM rate and the tank capacity of Craftsman CMEC6150K and Dewalt DWFP55126 enable them to run power tools with quick recovery. Due to these fast recovery features, they don’t let the motor get overheated.
Moreover, it reduces overall energy and electricity use and thus saves you money. Therefore, you can consider Craftsman CMEC6150K and Dewalt DWFP55126 ideal for homes or shops.
Craftsman CMEC6150K and Dewalt DWFP55126 have three sturdy rubber feet which firmly hold them to the ground. These thick rubber feet reduce the vibration of the air compressor while operating.
Thus, it keeps the noise level down and creates a quieter working environment, ideal to use at homes or shops.
Pancake-style air compressors are excellent for small air compressors like Craftsman CMEC6150K and Dewalt DWFP55126.
Moreover, such a structure of the air compressors makes them portable and convenient. You can easily transport these lightweight pancake-style air compressors while working around your home.
You can use Craftsman CMEC6150K and Dewalt DWFP55126 for various uses like- drilling, nailing, spraying, airbrushing, spray paint, nail gun, etc.
Moreover, tire filling with these air compressors is also possible. Besides these, you can use them for many other small works at home or in shops.
Both Craftsman CMEC6150K and Dewalt DWFP55126 come with a 1-year manufacturer’s warranty. However, this warranty has many limitations and may not be considered based on facts like- the authenticity of the product, where you got it from, etc.
Therefore, buy your Craftsman and Dewalt air compressors from a licensed vendor who can guarantee the product’s authenticity. And do not forget to keep the warranty card and money receipt to get warranty facilities within that period.
After all these discussions, I highly recommend you to go for Dewalt DWFP55126. It has a 6-gallon tank that can generate maximum air pressure of 165 PSI.
Moreover, it provides a quieter work environment with its lower noise level. Thus, it is convenient to use at homes and shops. In addition, you can use it for versatile work like- spray brushing, tire filling, drilling, nailing, etc.
Dewalt DWFP55126 is also lightweight and convenient to use. So, after analyzing all the features, there is no doubt that purchasing Dewalt DWFP55126 will be an excellent decision.
However, if you disagree with my point of view, you can also buy Craftsman CMEC6150K considering the accessory kits that come with its packaging.
Frequently Asked Questions About Craftsman Vs Dewalt
Is Dewalt DWFP55126 ideal for filling truck tires?
Dewalt DWFP55126 can fill truck tires. However, the refilling time varies depending on the size of the tire. And filling a big tire may take time as more air is required to fill it.
What is the hose length of Craftsman CMEC6150K?
The Craftsman CMEC6150K comes with a hose of 16 feet within the packaging. So, you do not need to buy a separate hose with this air compressor. It is further made of synthetic plastic and is easily removable.
Does Dewalt DWFP55126 come with a hose?
Unfortunately, the packaging of Dewalt DWFP55126 does not come with a hose. Therefore, you have to buy the hose separately.
Can you use a brad nailer on Craftsman CMEC6150K?
Yes, Craftsman CMEC6150K comes with a brad nailer gun and a finish nailer gun. You can use them for inflating tires and light farming.
Do Craftsman CMEC6150K and Dewalt DWFP55126 include accessory kits?
Craftsman CMEC6150K includes an attractive 13-pis accessory kit with all primary components for versatile works. Such as hose, brad nailer, finish nailer, etc. However, Dewalt DWFP55126 doesn’t include any accessory kits.