Unscrewing an oil filter can seem tricky, but it’s manageable with the right steps. This guide will help you get it done.

Changing your car’s oil filter is a basic task. You don’t need to visit a mechanic. With a few tools and some patience, you can do it yourself. First, gather all necessary tools, including an oil filter wrench. Next, ensure your car is parked on a flat surface.

Safety first! Wear gloves to protect your hands from oil. Loosen the filter by turning it counterclockwise. Be prepared for some oil to spill out. Once loose, remove the filter completely. Take note of how it was attached. This will help when you install the new one. Following these steps, you can unscrew an oil filter easily.

1	Top Pick WORKPRO 12″ Adjustable Oil Filter Pliers, Wrench Adjustable Oil Filter …	Check Latest Price
2	Best Quality HORUSDY 12″ Adjustable Oil Filter Pliers, Adjustable Oil Filter Wrench …	Check Latest Price
3	Recommended BILITOOLS Oil Filter Removal Tool, Universal Oil Filter Wrench Set …	Check Latest Price
4	Oil Filter Wrench (L:12″, Jaw Capacity: 60mm to 102mm), Automotive …	Check Latest Price
5	Spurtar Adjustable Oil Filter Wrench 2-3/8 to 3-1/8 inch 60-80mm …	Check Latest Price
6	WORKPRO Universal Oil Filter Wrench Adjustable, Magnetic Oil Filter Removal …	Check Latest Price
7	WORKPRO Nylon Strap Oil Filter Wrench, Universal Oil Filter Removal …	Check Latest Price
8	Eastyard Universal Oil Filter Wrench Adjustable 3 Jaw Oil Filter …	Check Latest Price
9	lernbac Universal Oil Filter Wrench Adjustable, from 2-1/2 inch to …	Check Latest Price
10	Spurtar Swivel Oil Filter Wrench Set of 5 Adjustable Wrench …	Check Latest Price

Buying Guide On How To Unscrew An Oil Filter

how to unscrew an oil filter – a complete buying guide

changing an oil filter can be easy. Follow these steps to unscrew it:

1. gather necessary tools

   first, get an oil filter wrench. Choose the right size. Also, have a drip pan and gloves ready.

2. locate the oil filter

   find your car’s oil filter. It’s usually near the engine. Check the manual if unsure.

3. prepare the area

   place a drip pan under the filter. Protect the ground from oil spills. Wear gloves to keep hands clean.

4. use the wrench

   attach the oil filter wrench to the filter. Turn it counterclockwise. It should start loosening.

5. remove the oil filter

   once loose, remove it by hand. Be ready for oil to drip out. Place the old filter in the drip pan.

6. clean the area

   wipe the mounting area clean. Ensure no old gasket remains. This step is crucial for a proper seal.

7. dispose of the old filter

   dispose of the old filter properly. Follow local guidelines. Many places recycle them.

by following these steps, you can easily unscrew an oil filter. Maintenance is simple with the right tools and steps.

Conclusion

Removing an oil filter doesn’t have to be difficult. With the right tools and steps, it becomes a simple task. First, gather your tools and prepare your workspace. Safety should always come first. Next, follow the step-by-step guide to unscrew the filter.

Remember to use the correct amount of force to avoid damage. If the filter is stuck, don’t panic. Use a wrench or a strap for extra grip. After removing the filter, clean the area thoroughly. Lastly, ensure the new filter is installed correctly to prevent leaks.

By following these guidelines, you can maintain your vehicle easily. Regular oil changes and filter replacements keep your engine running smoothly. So, take your time, follow the steps, and your car will thank you.